Harrington Hoists Chainsaw Sharpener TCR User Manual

 

5

 

 

 

Equipment described herein is not designed for and MUST NOT be used for lifting, supporting, or transporting people, 
or for lifting or supporting loads over people. 

 

Equipment described herein should not be used in conjunction with other equipment unless necessary and/or 
required safety devices applicable to the system, crane, or application are installed by the system designer, system 
manufacturer, crane manufacturer, installer, or user. 

 

Modifications to upgrade, rerate, or otherwise alter this equipment shall be authorized only by the original equipment 
manufacturer. 

 

Equipment described herein may be used in the design and manufacture of cranes or monorails.  Additional 
equipment or devices may be required for the crane and monorail to comply with applicable crane design and safety 
standards.  The crane designer, crane manufacturer, or user is responsible to furnish these additional items for 
compliance.  Refer to ANSI/ASME B30.17, “Safety Standard for Top-Running Single Girder Cranes”; ANSI/ASME 
B30.2 “Safety Standard for Top-Running Double-Girder Cranes”; and ANSI/ASME B30.11 “Safety Standard for 
Underhung Cranes and Monorails”. 

 
If a below-the-hook lifting device or sling is used with a hoist, refer to ANSI/ASME B30.9, “Safety Standard for 
Slings” or ANSI/ASME B30.20, “Safety Standard for Below-the-Hook Lifting Devices”.

 

  

Hoists, trolleys and cranes, used to handle hot molten material may require additional equipment or devices.  Refer to 
ANSI Z241.2, “Safety Requirements for Melting and Pouring of Metals in the Metalcasting Industry”. 

 

Failure to read and comply with any one of the limitations noted herein can result in serious bodily injury or death, 
and/or property damage.