Haier IPD-100 User Manual

8

The CR2032 lithium battery is already installed in the remote control. Pull out the small 
mylar insulation tab as shown in the illustration to begin using the remote control. 

To  use  the  remote  controller,  point  the  remote  control  transmitter  on  the  remote  control 
toward the remote control receiver on the front panel of the main unit and press the desired 
button. The effective range of the remote controller is approximately 20 feet. Please note that 
bright sunlight or artificial light may interfere with the proper operation of the remote control.

Battery Replacement
When  the  remote  operation  becomes  weak  or  intermittent,  it  is  time  to  replace  the  remote 
control battery. Pull out the battery holder, remove the old battery and install a new CR2032 
battery  in  the  holder  as  shown  in  the  illustration.  Slide  the  holder  back  into  the  remote 
control.
NOTE: If the battery is installed incorrectly the remote control will not work.

CR

2032

1

2

3

4

5

6

7

8

9

10

12

11

1. Remote Control Transmitter

2.  Power Button

3. iPod MENU + Button

4. SKIP       Button

5. ENTER Button

6. iPod MENU -  Button

7. PLAY / PAUSE      Button

8. VIDEO OUT Button

9. VOLUME      Button

10. SKIP       Button

11. MENU Button

12. 3D SOUND Button

13. VOLUME       Button

•  Make sure that you have removed
   the mlar insulation tab from the 
   remote control.

•  Ensure the system is connected to an AC outlet that is always “live”.

13

P

U

L

L