Haier HHX6130 User Manual

English

 – In ductless installations, air is vented back into the kitchen through the opening in 

the range hood grille. If you do not anticipate heavy  
cooking, this method may be preferable. Ductless
installation requires the use of a charcoal filters (included)
to remove odors, which should be replaced at regular
intervals depending on use. Check with your local retailer
or dealer for replacements. For ductless discharge do  
not remove A or B.

 This charcoal filter is not dishwasher safe!

  If replacing an existing hood, the electrical cable may need to be re-routed to 

the desired position.

1.  Determine the location of the electrical cable to connect to the range hood (Fig. 2). The  

preferred location for the electrical connector, vertical or horizontal, will depend on the  
existing installation or ease of routing wiring. All electrical connections must comply with 
national and local codes. Transfer the location of the selected range hood knockouts  
to the bottom of the cabinet or onto the wall, then cut or drill a hole to allow for  
clearance of the electrical cable clamp. Be careful not to cut into any hidden utilities, 
such as electrical wires.

2. Once you have planned your ducting and electrical installation, remove the appropriate  
    electrical knockouts on the back or top of the range hood, attach the damper frame  
    and install a standard electrical cable clamp.