Hach sc1000 User Manual

The keypad pops up automatically if it is necessary to enter characters or numbers to a 
configuration setting. 

This display is used to enter letters, numbers and symbols as needed when programming 
the instrument. Unavailable options are disabled (grayed out). The icons on the right and 
left of the screen are described in 

.

The central keypad changes to reflect the chosen entry mode. Press a key repeatedly until 
the desired character appears on the screen. A space can be entered by using the 
underscore on the 

 key.

During initial commissioning of the sc1000 controller, the touch screen calibration will be 
automatically displayed. To configure the touch screen, follow the calibration points on 
the screen. Make sure that the touch screen is calibrated to the appropriate device 
(finger, stylus, etc.) that will be used by all operators. If the device is changed, it will be 
necessary to recalibrate the screen.

1. Select SYSTEM SETUP, DISPLAY SETTINGS, TOUCH SCREEN CALIBRATION. 

2. Follow the calibration points. When calibration is complete the Display Settings menu 

is displayed.

1. Select SYSTEM SETUP, DISPLAY SETTINGS, LANGUAGE. 

2. Use the 

 button or press the selected language to enter the list box. 

3. From the list box, select the language to display on the screen and select the 

 

button to confirm the selection or select the 

 button. 

Figure 42  Keypad

 arrow—Deletes the character previously entered 

in the new position.

 arrow—Moves the cursor 

position.

 button—Cancels the keypad input.

Keypad for entering regular numbers, characters, 
punctuation, symbols and numerical sub- and 
superscripts 

 button—Accepts the keypad input.