Gyration TM ULTRA CORDLESS OPTICAL MOUSE User Manual

If you are installing three or more devices on a single receiver, 

see “Installing 3 or More Devices” on page 12. Remember if a 

Teach/Learn sequence has already been performed, it is not 

necessary to re-synchronize the devices after a channel 

change. 

To change the channel: 

1. Press and hold the Channel button on the bottom of the 

mouse handset for two seconds. 

When you release the Channel button, the mouse will 

change to the next sequential channel and the green LED 

on the top of the handset (and the red LED on the bottom 

of the handset) will flash. The number of flashes indicates 

the new channel the mouse is using.

To power on:

„

Simultaneously press and release the Channel and 

Teach buttons on the bottom of the mouse for three 

seconds. It will confirm it is powering on by flashing its 

LED Indicator for one second.

To power off:

„

Simultaneously press and release the Channel and 

Teach buttons on the bottom of the mouse. It will 

immediately power off and be unresponsive to button 

clicks. It will confirm it is powering off by flashing its LED 

Indicator three times.

Powering off the mouse prevents battery drain when traveling. 

It is necessary to power the unit off when traveling on com-

mercial airlines due to FCC regulations regarding radio-emit-

ting devices.