Graco PRECISIONSWIRL 310554V User Manual
Unpacking and Repacking
8
310554V
Unpacking and Repacking
Unpacking the Product
The PrecisionSwirl orbital dispenser and control assem-
bly were carefully packaged for shipment by Graco.
When the package arrives, perform the following proce-
dure to unpack the units:
bly were carefully packaged for shipment by Graco.
When the package arrives, perform the following proce-
dure to unpack the units:
1.
Inspect the shipping box carefully for shipping dam-
age. Contact the carrier promptly if damage is dis-
covered.
age. Contact the carrier promptly if damage is dis-
covered.
2.
Unseal the box and inspect the contents carefully.
There should not be any loose or damaged parts in
the bag.
There should not be any loose or damaged parts in
the bag.
3.
Compare the packing slip against all items included
in the box. Any shortages or other inspection prob-
lems should be reported immediately.
in the box. Any shortages or other inspection prob-
lems should be reported immediately.
4.
Store the box and packing materials in a safe place
for future use. Graco recommends that all packing
materials be saved in case the unit needs to be
shipped again.
for future use. Graco recommends that all packing
materials be saved in case the unit needs to be
shipped again.
Repair and Repacking the
Product
Product
When the PrecisionSwirl orbital dispenser requires ser-
vice, it is the purchaser’s responsibility to have the unit
repaired. As an option, the purchaser can have the unit
repaired by an authorized Graco distributor. For addi-
tional information, read the following subsections.
vice, it is the purchaser’s responsibility to have the unit
repaired. As an option, the purchaser can have the unit
repaired by an authorized Graco distributor. For addi-
tional information, read the following subsections.
On–site Service
PrecisionSwirl components are customarily serviced by
the purchaser or an authorized Graco technician. When
service is required, follow the Service procedures in this
manual.
the purchaser or an authorized Graco technician. When
service is required, follow the Service procedures in this
manual.
Service by an Authorized Graco Distributor
The PrecisionSwirl orbital dispenser can be serviced by
an authorized Graco distributor after completing a
Return Goods Authorization (RGA) form. The purchaser
must re–package and ship the orbital dispenser to the
Graco distributor. When repacking the orbital dispenser,
perform the following steps:
an authorized Graco distributor after completing a
Return Goods Authorization (RGA) form. The purchaser
must re–package and ship the orbital dispenser to the
Graco distributor. When repacking the orbital dispenser,
perform the following steps:
1.
Retrieve the original box and packing materials for
shipment.
shipment.
2.
Place the orbital dispenser and any loose or dam-
aged parts in the same bag and box used in the
original shipment. Fill the box with filler material to
minimize the possibility of damage.
aged parts in the same bag and box used in the
original shipment. Fill the box with filler material to
minimize the possibility of damage.
3.
Seal the box tightly to protect its contents and pre-
vent shipping damage.
vent shipping damage.
4.
Insure your shipment for the proper replacement
value of its contents.
value of its contents.
5.
Ship the orbital dispenser freight prepaid to your
authorized Graco distributor for service.
authorized Graco distributor for service.