Graco FORERUNNER 110 User Manual

If your Forerunner screen or buttons 

stop responding, you can reset the 

device.
1.  Press and hold light until the screen 

goes blank. 

2.  Press and hold light until the screen 

turns on.

nOte: This does not erase any of your 

data or settings. 

If your Forerunner does not show heart 

rate data, you may need to pair the 

heart rate monitor. 
•  Bring the Forerunner within range 

(3 m) of the heart rate monitor. 
Stay 10 m away from other ANT 

sensors while pairing.

•  If   is off, press and hold menu, 

and select HR Monitor > On.

•  If   is flashing, from the timer 

page, press page to view the heart 

rate page. 
The Forerunner searches for your 

heart rate signal for 30 seconds.  

•  If the problem persists, replace the 

heart rate monitor battery. 

The heart rate monitor contains a 

user‑replaceable CR2032 battery. 
nOte: Contact your local waste 

disposal department to properly 

dispose of batteries. 
1.  Locate the circular battery cover on 

the back of the heart rate monitor.