Graco 309640A RACX Handtite Guard Leaflet

To reduce the risk of fluid injection or splashing in the eyes or on the skin, relieve air and fluid pressure in the system before installing, cleaning or
changing tips. See Pressure Relief Procedure in gun or sprayer manual.
S Keep clear of spray tip.  High-pressure spray or leaks can inject fluid into the body, resulting in serious injury which may

require amputation.  Never spray without a tip guard (D).

S Do not exceed 4050 psi (280 bar, 28 MPa) maximum working pressure.

Failure to install or use the RAC

t tip guard assembly correctly may result in an undirected spray of fluid into the eyes or on the skin of the operator.

Be sure you:
S Fully insert SwitchTip (A) into tip bore (C) in guard
S Do not trigger gun with SwitchTip handle between Spray and Clear positions
S Replace OneSealt when replacing worn SwitchTip

B

A

C

D

Insert SwitchTip in tip bore and firmly thread
assembly onto gun

Use SwitchTip handle to remove OneSeal
from tip guard

Engage gun safety and rotate
SwitchTip handle to Clear posi-
tion

Disengage gun safety and trigger
gun into pail to clear SwitchTip

Engage gun safety and rotate
SwitchTip handle to Spray posi-
tion

Disengage gun safety and trigger gun
into pail to verify SwitchTip is clear

Note:If SwitchTip is still clogged, follow Pressure Relief Procedure in gun or sprayer manual, and remove SwitchTip for

cleaning.

Clear
position

Spray
position

Use end of SwitchTip (A) to press OneSeal
(B) into tip guard (D), with curve matching tip
bore (C)

ti2508a

t Guard

D Patented aerodynamic design virtually eliminates paint buildup.

D Hand tighten on gun–no tools required.

D Fits all Graco airless spray guns.

D Use with RACX series SwitchTips only.

D Graco RACX SwitchTip sold separately.

309640A