GPX X642 User Manual
91
4
Flex a stack of envelopes back and forth, and then straighten the edges on a level surface.
Press down the corners to flatten them.
Press down the corners to flatten them.
Fan the envelopes. This prevents the edges of the envelopes from sticking together and helps
them feed properly.
them feed properly.
5
Load the stack of envelopes flap side down with the stamp area and the flap on the left. The
end of the envelopes with the stamp area enters the envelope feeder first.
end of the envelopes with the stamp area enters the envelope feeder first.
Let the envelopes at the bottom of the stack slide into the envelope feeder slightly more than
the ones at the top of the stack.
the ones at the top of the stack.
Warning:
Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self-
stick adhesives. These envelopes may severely damage the MFP.
stick adhesives. These envelopes may severely damage the MFP.
Note: When you load envelopes, do not exceed the maximum stack height. Use the stack
height label as a guide for the correct stack height when loading. Do not try to load
more envelopes indicated by the stack height label; overloading can cause jams.
more envelopes indicated by the stack height label; overloading can cause jams.