Goodmans G-SHOT 5011CC User Manual
16
(B) Charging it by power Adaptor
1.
Connect the Power Adapter (5V, 400mA) to the DC in jack and a house hold power outlet.
2.
It takes about three hours to achieve a full charge. Actual charging time depends on current battery
capacity and charging conditions. The caution LED (red) lights during charging and goes blinking after
roughly 2 hours, at which point the battery pack is 90% charged. Leaving the AC adapter connected for
approximately one hour more charges the battery pack until the LED goes off.
capacity and charging conditions. The caution LED (red) lights during charging and goes blinking after
roughly 2 hours, at which point the battery pack is 90% charged. Leaving the AC adapter connected for
approximately one hour more charges the battery pack until the LED goes off.
Note:
l
The power adapter provides an output voltage of 3.7 VDC at 400 milliamps and is intended for use only
with the battery charger. DO NOT ATTACH THE POWER ADAPTER DIRECTLY TO THE
with the battery charger. DO NOT ATTACH THE POWER ADAPTER DIRECTLY TO THE
G-SHOT3003CC CAMERA UNIT.