Go-Video T2040 User Manual

2 - Getting Started (cont.)

Step 4 - Turn on TV

Press POWER on the remote control.

• The Power indicator will turn green.

• Press POWER again to turn off the TV.

Step 5 - Search for Channels

Press SEARCH on the remote control.

• The LCD TV will automatically search for all available channels.

• To change the tuning band, see TV setup.

• To add or delete channels, see TV setup.

Step 6 - Select Channels

To select a channel, use the CH





buttons, or enter a 1-, 2- or 3 -digit number as follows:

To select a 1- or 2-digit channel number (e.g., channel 5)

1 Press the 0 button.

2 Press the 5 button.
* or simply press the 5 button.

To select a 3-digit channel number (e.g., channel 115)

Complete the following procedure within 4 seconds.

1 Press the 10+ button.

2 Press the 1 button.

3 Press the 5 button.

To select another input

Press

INPUT to change the on-screen view to PC, TV, AV (Video In), SV (S-Video In) or YCbCr

(Component Video In).

Notes:

• With the Antenna Source set to Antenna, you can select channels 1-69.

• With the Antenna Source set to Cable, you can select channels 1-125 channels.

• To set or change the Antenna Source; see page 14.

Step 7 - Adjust Volume

Press the VOL+/- buttons to adjust the volume.

• To mute the sound, press MUTE.