Gigabyte 7014 User Manual

Rev. 051208

page 106 of 152

Show all configuration parameters

Command Name

system show config

Description

Displays the software version, the mac address, and status of gigabit ports.

Syntax

system show config

Parameters

None

Example

N-TRON/Admin#[32]system/show> config

System Configuration   :
Product Configuration  : 7014FX2
Software Version       : 1.1.8
MAC Address            : 00:07:af:ff:e5:60
IP Configuration Mode  : manual
System IP Address      : 192.168.1.244
Subnet Mask            : 255.255.255.0
Gateway Address        : 192.168.1.1
System Name            : N-TRON Switch
System Contact         : N-TRON Admin
System Location        : Mobile, AL 36609
System Up Time         : 0 days:0 hours:28 mins:43 secs

Total Number of Ports  : 14
Port # 1 - 12          : 10/100 Mbps Copper and/or
                         100 Mbps Fiber
Port # 13              : Gigabit Transceiver
Port # 14              : Gigabit Transceiver

Notes

Show all configuration parameters related to SNMP manager

Command Name

system show snmpinfo

Description

To show all the configuration parameters related to snmp manager

Syntax

system show snmpinfo

Parameters

None

Example

N-TRON/Admin#[33]system/show> snmpinfo

System SNMP Configuration :
IP Address - Trap Station#1    : 192.168.1.2
IP Address - Trap Station#2    : Value Not Configured
IP Address - Trap Station#3    : Value Not Configured
IP Address - Trap Station#4    : Value Not Configured
IP Address - Trap Station#5    : Value Not Configured
SNMP Get Community Name        : public
SNMP Set Community Name        : private
SNMP Trap Community Name       : public

Notes

System Restart

Command Name

system restart

Description

To restart (reboot) the device

Syntax

system restart

Parameters

None

Example

N-TRON/Admin#[1]> system restart

Do you Want to Restart the System Now: [y/n]y
Do you Want to Save the Configuration: [y/n]y

................
................

Notes