Gigabyte 7014 User Manual

Rev. 051208

page 136 of 152

N-Ring get interval

Command Name

n-ring get interval

Description

To display the Self-Health Packet interval and missed threshold.

Syntax

n-ring get interval

Parameters

None

Example

N-TRON/Admin#[1]> n-ring get interval

Self Health Packet interval is 1
Maximum Missed Packets is 2

NOTES

Default: interval=1, missed=2

N-Ring set interval

Command Name

n-ring set interval

Description

Sets the Self-Health Packet interval and missed threshold.

Syntax

n-ring set interval <interval> [missed]

Parameters

interval and missed

Examples

N-TRON/Admin#[36]n-ring/set> n-ring set interval 1 3

Self Health Packet interval set to 1
Maximum Missed Packets set to 3

NOTES

The interval is in 10 millisecond increments. The missed threshold sets
how many missed Self-Health Packets constitute a fault.

N-Ring get mode

Command Name

n-ring get mode

Description

To display the current N-Ring Mode.

Syntax

n-ring get mode

Parameters

None

Example

N-TRON/Admin#[1]> n-ring get mode

N-Ring Mode : AutoMember
Port Set  : 100
VLAN ID :   1
Tagging :   Untagged

NOTES

Do not use Trunking on a switch that is directly in an active N-Ring.

N-Ring set

mode

Command Name

n-ring set mode

Description

Sets the current N-Ring Mode. Sets ring ports, vlanid and tagging, if manager mode.

Syntax

n-ring set mode <manager|automember|disable> [-rp <100|GB>] [-vlanid <id>] [-
tagging <tagged|untagged>]

Parameters

manager|automember|disable
       N-Ring mode
A|E
       N-Ring ports, 100 for ports FX1 and FX2, while GB for ports GB1 and GB2
id
       Unique vlan id (1 - 4094). Default is 3333.
tagged|untagged
       Determines whether the N-Ring ports are members of the VLANs
       Tagged or Untagged ports.  Default is Tagged.

Examples

N-Ring Mode set to automember
................
................
.
Device is Going for Reboot....

N-TRON/Admin#[3]> n-ring set mode manager -rp GB

N-Ring Mode set to manager
Port Set to be used is GB