Genie Radio RB709U-NB Leaflet
Programming the Receiver
Wiring Receiver to Common Gate and Door Openers
Wiring Receiver to GTO DC Operators
Wiring Receiver to GTO GP-SL100 & GP-SW100 Operators
Programming transmitter(s) or other access devices to RB709U-NB receiver:
• Press and hold the transmitter (device) button to be learned.
• Press the ‘LEARN CH1’ (or ‘LEARN CH2’) button on the RB709U-NB receiver
• Press and hold the transmitter (device) button to be learned.
• Press the ‘LEARN CH1’ (or ‘LEARN CH2’) button on the RB709U-NB receiver
for 1-2 seconds or until the red LED turns on, then release the button.
• Note: When the correct code is received and the corresponding relay output
is activated, the red LED will turn on.
Channel 1 (
GREEN
WIRE t
o C
OM)
Channel 1 (BL
UE
WIRE t
o C
YCLE)
BLA
CK
RED
Channel 2 (BROWN WIRE to COM)
Channel 2 (YELLOW WIRE to N/O Contact)
ALARM
ACC. POWER DUAL CABLE
+12V
dc
CO
M
DU
AL LINK
LINK C
OM
RELAY OUTPUTS
LOCK N.C.
LOCK C
OM
LOCK N.O
.
RUN 1
RUN 2
CL
OSED 1
CL
OSED 2
CY
CLE
SAFET
Y
OPEN EDGE
RUN 2
OPEN
CL
OSE
ST
OP
CO
M
CO
M
CO
M
SHADO
W
LOOP
Check operation after programming:
• Press Transmitter (device) button, #1 - RED LED blinks once to confirm.
• Press Transmitter (device) button, #2 - RED LED blinks twice to confirm.
• Press Transmitter (device) button, #1 - RED LED blinks once to confirm.
• Press Transmitter (device) button, #2 - RED LED blinks twice to confirm.
GTO GP-SL100 and GP-SW100 Contol Board
Typical GTO DC powered gate operators.
GTO 2000XL, 3000XL. 4000XL, and Mighty Mule 500
GTO 2000XL, 3000XL. 4000XL, and Mighty Mule 500
6 5 4 3 2 1
Genie Garage Door Opener
CHANNEL 1 (COM)
CHANNEL 1 (N/O)
Linear Garage Door Opener
PUSHBUTTON
COMMON
BEAM
ANTENNA
CHANNEL 1 (COM)
CHANNEL 1 (N/O)
Lift Master
Garage Door Opener
CHANNEL 1 (COM)
CHANNEL 1 (N/O)
Chamberlin
Garage Door Opener
CHANNEL 1 (COM)
CHANNEL 1 (N/O)
Lift Master SL580 Gate Opener
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
CHANNEL 1 (COM)
CHANNEL 1 (N/O)
CHANNEL 1 (N/O)
CHANNEL 2 (N/O)
CHANNEL 1 (COM)
CHANNEL 2 (COM)
RED WIRE to POSITIVE POWER
BLACK WIRE to NEGATIVE POWER
BATTERY or
TRANSFORMER
SURGE PROTECTOR
(RB570 or R4215)
Channel 1 (
GREEN
WIRE t
o C
OM)
Channel 1 (BL
UE
WIRE t
o C
YCLE/CL
OSE)
BLA
CK
RED
Channel 2 (YELLOW WIRE to COM)
Channel 2 (BROWN WIRE to N/O Contact)
Channel 2 (BROWN WIRE to N/O Contact)
GRN
BLK
RED
RECEIVER
COM
COM
CYCLE
CLOSE
SAFETY
EXIT
OPEN
SHADOW
LOOP
CLOSE
EDGE
OPEN
EDGE
J11
J8
J12
8 to 24 VOLT AC/DC
POWER SUPPLY or BATTERY
RED WIRE to POSITIVE
BLACK WIRE to NEGATIVE
BATTERY or
TRANSFORMER
SURGE PROTECTOR
(RB570 or R4215)
GTO • 3121 Hartsfield Road • Tallahassee, Florida 32303 • GTO Sales 1-800-543-4283 • Technical Support 1-800-543-1236 • www.gtoaccess.com
Connects to most garage
door openers the same
as a remote push button.
door openers the same
as a remote push button.