GE X-9 User Manual

The X-9 can send signals to and accept return signals 
from an external effects unit.

Such a unit can be connected using the 

 (to the 

effects unit) and 

 (from the effects unit) 

jacks. 

If the effects unit is only capable of accepting a mono 
input, read the documentation supplied with the 
effects unit, and make the appropriate connection to 
the 

 effect 

 jack of the X-9.

If the effects unit is only capable of producing a 
mono output, read the documentation supplied with 
the effects unit, and make the appropriate connection 
to the 

jack of the X-9.

Turn the 

 knob to select the 

signal that will be processed by the 
effects unit: a program (

 through 

), the 

microphone signal (

) or the master 

mix (

).

Adjust the input level to the effects unit 
and the output level of the signal from the effects unit 
using the controls of the external unit.

Turn the effect loop on and off with the 

 key (it lights when the loop is active).

It is also possible to use an external effects unit 
through the footswitches (see “Footswitch assign-
ment” on page 18 for details of this menu setting 
(

08Ft)

)).