Extron electronic Extron Electronics Music Mixer DMP 44 LC User Manual

To switch from emulate mode to live mode:

Click the Live button, see a on the main DSP Configurator screen. The 

Connect to device...

 dialog box opens.

- or -

DMP 44LC

As needed, click either the:

RS-232 tab (for connection to the rear panel RS-232 ports — proceed to step 3,

USB tab (for connection via the front panel configuration port — proceed to 
step 4.

If RS-232 was selected in step 2:

Click the Com Port drop-down menu and select the PC com port connected to 
the rear panel RS-232 port.

Check the baud rate displayed in the Baud Rate field. If the baud rate does not 
match the device rate, click the Baud Rate drop-down menu and select the 
desired baud rate. The default is 38400.

Click OK.

The Synchronize with Device dialog box appears. Proceed to step 5.

If USB was selected in step 2:

Click the USB Device drop-down menu and select 

 (or 

, if DMP 44 LC is not available),

Click 

.

The Synchronize with Device

dialog box appears. Proceed to step 5.

Several options are now available for either configuring the DMP 44 LC or 
reconfiguring to suit current operating conditions.