Extron electronic Extron Electronics Music Mixer DMP 44 LC User Manual

The next example shows how to customize a  
push to include only selected presets.   
Connect the DMP 44 LC as described by steps  
1 to 4 in the previous procedure for switching  
from Emulate mode to Live mode (see  
“

”),  

then:

Select the Push radio button, then click  

Advanced.

NOTE: Pressing 

OK at this time pushes 

the currently open configuration 
to the DMP 44 LC.

Select the Custom

radio button. 

Select Push Presets. 

Choose Selected.

Click OK. The 

Synchronize with Device  

dialog box appears.  

If it is not selected, select the Push the  

data... radio button and click OK again.    

If changes have been made to the DSP  
parameters (including mix-point, gain or  
processor blocks) since the last file save, the  
DSP Configurator prompts to save the file. 

Click Yes to open the file selection box,  
see previous sections for the 

Save File  

as...

  dialog box instructions. Accept  

the name, choose an existing file name  
or create a new one and click OK. The  
new configuration is pushed to the device.  

Click No to ignore the changes.

The 

Presets in the Configuration

 dialog  

box opens. Select the preset configurations  
to push to the DMP 44 LC. A  
checkmark appears for each selection.   
In this example, a checkmark has been placed  
in the 1. Input Procs and  

4. Output XPA preset check boxes.

Press OK. The DSP Configurator program  
saves the configuration then updates the  
DMP 44 LC configuration, overwriting the  
configuration in the device. When the  
transmit and receive indicators stop flashing,  
the upload is complete and the DSP  
Configurator program is now connected  
live to the DMP 44 LC.  
  
Changes to the configuration are reflected  
immediately in the device operation.