Extron electronic Extron Electronics Music Mixer DMP 44 LC User Manual

Hold the reset button while 
applying power.

NOTE:  After a mode 1 reset, 

update the DMP 44 LC 
firmware to the latest 
version. DO NOT 
operate the firmware 
version that results from 
this mode reset.

The DMP 44 LC reverts to the 
factory default firmware.
Event scripting does not start if the 
DMP 44 LC is powered on in this 
mode. All user files and settings 
(drivers, adjustments, IP settings, 
etc.) are maintained.

NOTE:  If you do not want to 

update the firmware, or 
perform a mode 1 reset 
by mistake, cycle power 
to the DMP 44 LC to 
return to the firmware 
version running prior to 
the reset.

This mode reverts to the 
factory default firmware 
version if incompatibilty 
issues arise with user-
loaded firmware.

NOTE:  User-defined 

Web pages 
may not work 
correctly 
if using 
an earlier 
firmware 
version.

Press and hold the Reset button for 
about 9 sec. until the Power LED 
blinks three times (once at 3 sec., 
again at 6 sec., again at 9 sec.), 
then release and within 1 second 
press Reset momentarily (< 1 sec.). 

NOTE:  The reset procedure is 

aborted if the second 
momentary press does 
not occur within one 
second.

Mode 5 performs a complete 
reset to factory defaults, except 
for firmware:
•  Does everything mode 4 reset 

does.

•  All mix-points set muted and 

set to 0 dB.

•  All outputs unmuted and set to 

0 dB.

•  DSP processing returned to 

defaults and bypassed.

•  All inputs muted and set to 

0 dB.

•  All presets and group master 

memory cleared.

Useful to start over 
with configuration 
or uploading, and to 
replace events.