Gateway Printer 9250C User Manual

The 

Initial Setup

 menu contains the sub-menus shown:

●

Networking and I/O

 menu

●

E-mail Setup

 menu

●

Send Setup

 menu

Values shown with "(default)" are the factory-default values. Some menu items have

no default.

I/O Timeout

 

Select a value in the
range. The factory default
setting is 15 seconds.

I/O timeout refers to the elapsed time before a job fails.
If the stream of data that the device receives for a job
gets interrupted, this setting indicates how long the
device will wait before it reports that the job has
failed.

Embedded Jetdirect

See 

 for the list of options.

EIO <X> Jetdirect

TCP/IP

Enable

 

Off

: Disable the TCP/IP protocol.

On

 (default): Enable the TCP/IP protocol.

Host Name

 

An alphanumeric string, up to 32 characters, used to
identify the device. This name is listed on the
HP Jetdirect configuration page. The default host name
is NPIxxxxxx, where xxxxxx is the last six digits of the
LAN hardware (MAC) address.

 

IPV4 Settings

Config Method

Specifies the method that TCP/IPv4 parameters will be
configured on the HP Jetdirect print server.

Bootp

: Use BootP (Bootstrap Protocol) for automatic

configuration from a BootP server.

DHCP

: Use DHCP (Dynamic Host Configuration

Protocol) for automatic configuration from a DHCPv4
server. If selected and a DHCP lease exists, 

DHCP

Release

 and 

DHCP Renew

 menus are available to set

DHCP lease options.

Auto IP

: Use automatic link-local IPv4 addressing. An

address in the form 169.254.x.x is assigned
automatically.

Manual

: Use the 

Manual Settings

 menu to configure

TCP/IPv4 parameters, such as an IPv4 address like
123.123.123.123.

ENWW

Initial Setup menu

21