EUROCOM Eurocom Desknote 5100C User Manual
3-2
User's Manual
!
!
!
!
Power on Self Test (POST)
The system BIOS (Basic Input/Output System) performs a series of Power
On Self Test (POST) on system memory and key computer components
every time the computer is turned on. If an error exists, the POST routine
may halt execution (depending on the problem). If no error exists, the
POST will initializes BIOS configuration, then boots the operating system.
On Self Test (POST) on system memory and key computer components
every time the computer is turned on. If an error exists, the POST routine
may halt execution (depending on the problem). If no error exists, the
POST will initializes BIOS configuration, then boots the operating system.
POST Message: Normal Operation
You will see the following message if no error exists after the POST is
performed.
performed.
SystemSoft BIOS MobilePRO BIOS Version 1.01 (2482-00)-(R1.00.tr02)
Copyright 1983-1996 SystemSoft Corp. All Rights Reserved
Copyright 1983-1996 SystemSoft Corp. All Rights Reserved
300 MHz Celeron with MMX CPU
L2 Cache: 128KB Installed
4 MB Video RAM
SystemSoft Plug-n-Play BIOS ver1.17.01
L2 Cache: 128KB Installed
4 MB Video RAM
SystemSoft Plug-n-Play BIOS ver1.17.01
Base Memory 000640 Kb
Extended Memory 130048 Kb
Total Memory 131072 Kb
Extended Memory 130048 Kb
Total Memory 131072 Kb
Auto Detecting IDE Devices[Done]
<CTRL-ALT-S> to enter System Configuration Utility
<CTRL-ALT-S> to enter System Configuration Utility
Note:
You may press the Spacebar key to skip the memory test.
You may press the Spacebar key to skip the memory test.