ETA Systems Recording Equipment ETA-ECS6RM User Manual

Specifications are subject to change without notice.

1601 Jack McKay Blvd. • Ennis, Texas 75119  U.S.A.

Telephone: 800-321-6699 • Fax: 800-996-3821

 • Plugging in or unplugging the power cord with wet hands may result in electric shock.
 •   Never move the device with the power cord plugged into the wall, as damage to the power cord may result.
 •   When unplugging the cord from the wall, grasp the plug, NOT the cord.
 •   Never install this device in humid or dusty locations, nor in direct sunlight, near sources of heat, or in areas where sooty smoke or

steam are present. Fire and electric shock may result.

 •   Keep all sides of the device at least 3

1

⁄

2

" away from objects that may obstruct air flow to prevent the unit's internal temperature 

rise.

 •   To prevent electric shock, do not remove the device cover as there are high voltage components inside. Refer all servicing to ETA

Systems.

 •   Should any of the following irregularities occur during use, immediately switch off the power, disconnect the power cord from

the AC outlet and contact ETA Systems. Do not to attempt to continue operation of the device as this may cause fire or electric 
shock.

    •   Smoke or strange smell coming from the unit.
    •   If the device falls or the case is damaged.
    •   If water or any metallic objects fall into the device.
    • If the power supply cord is damaged in any way.
    •   If the device is malfunctioning.
 •   Do not insert or drop metallic objects or flammable materials into the ventilation holes of the device's cover, as this may result in

electric shock or fire.

 •   Do not place any metallic objects or containers with liquid on the top of the device. If any liquid spills into the unit, fire or electric

shock may result.

 •   Never operate this device or touch the power supply cord during an electrical storm, electric shock may result.
 •   Never exceed the wattage on the product when connecting equipment. Fire and/or property damage may result.
 •   Operate the device only with the voltage specified on the unit. Fire and/or electric shock may result if a higher voltage is used.
 •   Do not modify, kink, or cut the power cord. Do not place the power cord in close proximity to heaters and do not place heavy

objects on the power cord, including the device itself, doing so may result in fire or electrical shock.

 •   Ensure that the safety ground terminal is connected to a proper ground. Never connect the ground to a gas pipe as a catastrophic

disaster may result.

 •   Be sure the installation of the product is stable, avoid slanted surfaces as the product may fall and cause injury or property

damage.

 

 •   Never place heavy objects on the product, causing it to fall and/or break, resulting in personal injury and property damage. In

addition, the product itself may fall and cause injury and property damage.

 •   Contact ETA Systems for instructions on cleaning the inside of the unit. Large accumulations of dust inside the unit may result in

heat buildup and fire.

 •   Ensure that the power supply plug is securely plugged into the wall outlet. Never allow dust to accumulate on the power plug or

inside the wall outlet.

 •   When cleaning the unit or the unit is not to be operated for an extended time period, unplug the power cord from the wall.