Escient MP-100 User Manual

P

AGE

 140

F

IRE

B

ALL

-MP I

NSTALLATION

 & U

SER

’

S

 G

UIDE

 - M22002-01A1

A

PPENDIX

 H - R

EMOTE

 C

ONTROL

 

2

When batteries need replacement, 
the Remote will blink twice with 
every key press. Simply replace 
them and the remote control will 
be restored to its full functionality, 
including favorite settings. 

1.    On the back of the Remote, push the tab and remove the battery cover. 
2.    Obtain two (2) fully-charged AA alkaline batteries. Match the + and – marks on the 

batteries to the + and – marks in the battery case, then insert the new batteries. 

3.    Press the battery cover back into place. The tab should click when the cover is 

locked. 

4.    Test the unit by pressing any key on the remote. If the batteries are inserted correctly, 

the LED will blink each time you press a key. 

The Remote can control up to 8 different components. Note that 3 of these are already 
reserved for Escient's FireBall-MP, TuneBase 200, and PowerPlay products. Perform the 
following instructions for each component you want controlled:  
1.    Turn on a component (e.g., VCR) and, if applicable, insert media, (e.g., cassette or 

disc). NOTE: Please read steps 2-4 completely before proceeding. We recommend 
highlighting or writing down the codes and device you wish to program before 
moving onto step 2. 

2.    On the Remote, press a component key once (i.e., AUX, CBL, DVD, TV, RCV). 

Press and hold CODE SET until the LED blinks twice, then release. 

3.    Use the Manufacturer’s Codes (last section in this appendix) to locate the type 

of component and brand name and then enter the first four-digit code for your 
component. If performed correctly, the LED will blink twice.