Ericsson Multi-Format Receiver RX1290 User Manual

Menus 

 

 

Select XXXX 

XXXX is the editable input source selection (ASI, SMPTE 310, 
any option cards). 

When a DVB-S2 interface is used, the Input menu allows the user to edit the 
parameters. 

Input Quality  
BER

 XX  

C/N YY 
C/N Margin ZZ 

 
XX is the signal quality expressed as BER 
YY is the estimated carrier to noise ratio in dB 
ZZ is the estimated carrier to noise ratio margin to failure in dB 

Input Select 
Source XX 

 
XX is 1, 2 3 or 4 for RX1290/HWO/DVBS2 
XX is 1,2,3, IF for RX1290/HWO/DVBS2/IF/CONST 

Input LNB Frequency RR 
Satellite Frequency SS 
Symbol Rate TT 
Modulation UU 
Roll-off VV 
Search Range WW 
Mode XX

LNB Power YY 
LNB 22 kHz ZZ 

RR is the LNB FREQUENCY in MHz 
SS is the SATELLITE FREQUENCY in MHz 
TT is the SYMBOL RATE in Msym/s 
UU is the MODULATION Standard (DVB-S or DVB-S2) 
VV is the spectral ROLL-OFF (35%, 25%, 20%) 
WW is the SEARCH Range in kHz 
XX is the constellation output mode (NORMAL or CONSTELLATION) 
YY is the LNB POWER (ON, OFF or BOOSTED) 
ZZ is ENABLE/DISABLE 

When a TTV G.703 input interface is used, the Input menu allows the user to edit 
the set-up parameters  

                                                      

1

 BER is Post Viterbi BER for DVB-S, Packet Error Ratio for DVB-S2 

2

 TT1260/HWO/DVBS2/ASI/IF/C option only.  Enabling CONSTELLATION Mode renders the receiver unable to decode a service. 

 

EN/LZT 790 0003/2 R1A

 

C-8