Ericsson Multi-Format Receiver RX1290 User Manual
Installing the Equipment
Warning!
The RX1290 should only be operated from the type of power source indicated on
the marking label. If you are not sure of the type to your business, consult your
appliance dealer or local power company. Do not overload wall outlets and
extension cords as this can result in a risk of fire or electric shock.
the marking label. If you are not sure of the type to your business, consult your
appliance dealer or local power company. Do not overload wall outlets and
extension cords as this can result in a risk of fire or electric shock.
The RX1290 Receivers are not fitted with an AC power ON/OFF switch. Ensure the
supply socket outlet is installed or located near the equipment so that it is
accessible.
supply socket outlet is installed or located near the equipment so that it is
accessible.
Figure 2.2 AC Power Inlet Assembly
Note: See
Annex B, Technical Specification for fuse information.
Position of the fuse carrier
AC Power Inlet
2.5.2
AC Power Supply Cord
2.5.2.1
General
A two-meter power supply cord is supplied with this product. It is fitted with a molded
plug suitable for the USA, UK or mainland Europe as advised at the time of ordering.
plug suitable for the USA, UK or mainland Europe as advised at the time of ordering.
Note: The equipment is not fitted with an AC power supply ON/OFF switch.
Ensure the socket-outlet supplying the equipment is installed near the
equipment so that it is easily accessible.
equipment so that it is easily accessible.
2.5.2.2
Wire Colors
The wires in the supply cord are colored as shown in Table 2.1.
Table 2.1 Supply Cord Wiring Colors
UK (BS 1363)
EUROPE (CEE 7/7)
USA (NEMA 5-15P)
Earth: Green-and-yellow Green-and-yellow Green
Neutral: Blue
Blue
White
Live: Brown
Brown
Black
EN/LZT 790 0003/2 R1A
2-7