Ericsson Multi-Format Receiver RX1290 User Manual

 

Operating the Equipment Locally

 

1 

Go to Menu 3.1.15 and edit 
the option displayed. (LOW 
DELAY MODE, NORMAL). 
Press Save 

Gains access to the low delay option. There is a 
choice between low delay and normal mode. 

Automatic audio component selection is based on component order in the PMT as 
follows: 
•  Audio 1 selects the first component in the PMT, Audio 2 selects the second 

component, Audio 3 selects the third component and Audio 4 selects the fourth 
component.  

•  Audio 1 does not select the same component as Audio 2 and vice-versa when 

component-PIDs are reordered in a new PMT.  

•  Coding type and language are manually selectable through the User PID and 

type parameters.  

It is possible to manually select any audio component from the active Service by 
using the front panel controls or via the remote control interface. Select one of the 
audio components in the list or enter the correct PID. Table 3.17 describes the 
procedure for selecting a component.  

1 

Go to the Menu 3.2 and press 
Edit. Select between Standard 
(the default for most 
applications) and AAC Downmix 
+ 5.1decode. 

Selects if the user wishes to do a AAC5.1 
decode or not. 

1 

Go to the Menu 3.3 and press 
Edit. Select one of the audio 
streams or enter an audio PID. 

Selects the audio component.  

2 

Scroll to Menu 3.3.3 and edit the 
Audio 1 delay adjustment (range 
± 0 to 49.5ms). Press Save. 

Edits the Audio 1 delay adjustment. 

EN/LZT 790 0003/2 R1A

 

 

 

 

3-17