Epson MediaLink Controller MLC 104 IP Plus User Manual

Adding an A/V device (projector displays, VCRs, DVDs, etc.) 

for an MLC to control requires that you first add the device’s 

driver to the GC configuration.

If you successfully downloaded device drivers in  

"Step 1: Download Device Drivers", proceed to "Adding a serial 

driver" on the following page.
If you have not downloaded or need additional device drivers 

for your open project, you'll need to save and close the current 

project to access new drivers.  To do so,
1.

 

Select New from the File menu, but click the Yes button 

when prompted to save.

 

If the file was not previous saved, you must enter a project  

name in the Project Name field. 

 

Click the OK button.  This automatically closes the current 

project.

 

Click the Add Drivers Subscription button on the start 

options dialog. 

 

Follow the instructions under "Step 1: Download Device 

Drivers".

 

Reopen the saved project by choosing Open An Existing 
Project

 from the list of options.

You are now ready to add A/V devices to the configuration 

using the new drivers.

 

From the IP Link tab (on the left pane), select the port 

named Display.

 

Use the drop-down menus under Serial Driver Selection 

to select the device type (choose video projector), and 

manufacturer (choose Epson).  For this example, select the 

 video projector from the Available 

 field.

 

Click the Add Driver button.  The Epson projector appears 

within the Selected Driver field.

 

Notice that this action also populates the Driver 

 field with predefined 

functions.  These functions later appear as buttons on your 

GlobalViewer

®

 Web page.