Epson V7 User Manual

3-44

7. PLC2Way

3. Trend sampling or data sampling setting

To show data stored in the specified buffer number, trend sampling or data sampling
must be set. Click the [Trend Sampling] or [Data Sampling] icon and make the setting.
For more information, refer to the Reference Manual (Function).

Data Transfer from the PLC2 Memory

Data in the PLC2 memory can be transferred to the PLC memory, V7 internal memory or a
memory card at one time. Conversely, it is also possible to transfer data in the PLC
memory, V7 internal memory or a memory card to the PLC2 memory at one time. To
perform butch data transfer from the PLC2 memory, the following settings are required.

• Temperature control network/PLC2Way table editing

For temperature control network/PLC2Way table editing, the setting in the [Temp.
CTRL/PLC2Way Table Setting] dialog is not necessary.

• Macro (TEMP_READ/TEMP_WRITE)

• Memory card setting (when a memory card is used)

1. Macro

[TEMP_READ]

Data in the PLC2 memory addresses set in the temperature control
network/PLC2Way table specified for F1 is transferred to the memory addresses
starting from F0.

Usable Devices

TEMP_READ: Temperature control network table read

TEMP_READ F0 <- TABLE : F1

[TEMP_WRITE]

Data in memory addresses starting from F1 is transferred to the PLC2 memory of
the temperature control network/PLC2Way table specified for F0.

Usable Devices

TEMP_WRITE: Temperature control network table write

TEMP_WRITE TABLE : F0 <- F1

Trend sampling

Data sampling

PLC Memory

Internal

Memory

Constant (Temperature

Control Table No.)

Memory Card

Indirect

Designation