Epson V7 User Manual
2-34
3. Errors Displayed on the V7 Series
Error Messages for Network Communication
• Ethernet
• MELSECNET/10
• CC-LINK
Error Message
Contents
Solution
Ethernet Error: XXXX
The Ethernet status is saved at system
memory address $s518 and a code other
than “0” (normal) is received.
XXXX: Error No.
memory address $s518 and a code other
than “0” (normal) is received.
XXXX: Error No.
For the contents and solution to each
error number, refer to “Chapter 4
Network Communications/Error Display.”
error number, refer to “Chapter 4
Network Communications/Error Display.”
Error Message
Contents
Solution
I/F Board Err
The I/F unit for NET/10 has an error.
Contact your local distributor.
Request Code Err
The request command from NET/10 has
an error.
an error.
Request Data Err
The request data from NET/10 has an
error.
error.
Word Writing to Sp. Relay
(MITSUBISHI: A Series)
(MITSUBISHI: A Series)
Word writing to a special relay (M9000
and later) is attempted.
(Notes: Only bit writing is possible for
special relays when connecting with
NET/10.)
and later) is attempted.
(Notes: Only bit writing is possible for
special relays when connecting with
NET/10.)
Do not attempt to perform word writing to
special relays.
special relays.
Error Message
Contents
Solution
I/F Board Err
The I/F unit for CC-LINK has an error.
Contact your local distributor.
No. of Occupy Setting Err
The number of occupy in [Comm.
Parameter] is different from the number
of occupy by switches.
Parameter] is different from the number
of occupy by switches.
Check the setting of the number of
occupy.
occupy.
Network I/O Access Err
MONITOUCH is about to access
exceeding the set number of input/output
words.
exceeding the set number of input/output
words.
Check the memory for the network I/O in
the screen data file.
the screen data file.
Station Number Err
The port number set by a switch is not
within the setting range (1 to 64).
within the setting range (1 to 64).
Specify the port number within the setting
range.
range.
Word Writing to Sp. Relay
Word writing to a special relay (M9000
and later) is attempted.
(Notes: Only bit writing is possible for
special relays when connecting with
CC-LINK.)
and later) is attempted.
(Notes: Only bit writing is possible for
special relays when connecting with
CC-LINK.)
Do not attempt to perform word writing to
special relays.
special relays.