Epson BrightLink Pro 1430Wi Collaborative Whiteboarding Solution with Touch User Manual
Note: If you are connecting three or more projectors, connect the projectors in a chain as shown.
2.
In the Extended menu, set the Sync of Projectors setting to Wired.
Note: If you are using the projector in the same room as another projector that does not support
cable connection, set the Wired Sync Mode setting to Mode 2 in the projector's Extended menu. If
you do not have the optional remote control cable, set the Distance of Projectors setting in the
projector's Extended menu to Mode 2.
cable connection, set the Wired Sync Mode setting to Mode 2 in the projector's Extended menu. If
you do not have the optional remote control cable, set the Distance of Projectors setting in the
projector's Extended menu to Mode 2.
Parent topic:
Installing Batteries in the Remote Control
The remote control uses the two AA batteries that came with the projector.
Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types,
or mix new and old batteries.
or mix new and old batteries.
1.
Open the battery cover.
78