Epson BrightLink Pro 1410Wi Meeting Room Productivity Tool with Wall Mount Installation Guide
36
6 Adjusting the Image
To ensure the best image quality, follow the steps below to adjust the projected image.
When using the BrightLink 475Wi/480i/485Wi, follow these guidelines for setting up the projector:
•
Make sure the image is evenly rectangular, without distortion.
•
Make sure the projector is tilted no more than ±3° vertically and horizontally in relation to the projected
image.
image.
•
If you must use the Keystone function, make sure the amount of vertical and horizontal keystone
correction is no more than ±6.
correction is no more than ±6.
A
Turn on the projector
B
Display the mount adjustment test pattern, as described below
1.
Press the [Help] button.
2.
Press the [ ] button on the remote control, or the [Wide] button on the control panel.
The test pattern is displayed.
Do not make adjustments with the Keystone function of the projector. Doing so may
result in a reduction in image quality.
result in a reduction in image quality.
Using the Remote Control
BrightLink 475Wi/480i/485Wi
PowerLite 470/475W/480/485W
Using the Remote Control
BrightLink Pro 1410Wi
Using the Control Panel
Using the Remote Control
BrightLink 475Wi/480i/485Wi
PowerLite 470/475W/480/485W
Using the Remote Control
BrightLink Pro 1410Wi
Using the Control Panel
Using the Remote Control
Using the Control Panel