Epson BrightLink Pro 1410Wi Meeting Room Productivity Tool with Wall Mount Operating Guide

The icon patterns and their meanings are explained below.

*1 When Temperature level display group view is set to On at Environment 

setup in the Tool menu, an icon indicating the internal temperature of the 
projector will be displayed on top of the projector icon. The default setting 
is Off. As you can get an idea of how the temperature inside the projector is 
increasing when Temperature level is displayed, you can make 
improvements to the projector's operating environment before a high 
internal temperature error or high-temperature warning occur. s

*2 Check the following items.

- Check that the projector's power is turned on.
- Check that the LAN cable is connected.
- Check that Standby Mode is set to Communication On (or Network On) 
or Network Monitoring is set to On in the projector's configuration menu.

*3 Check that the projector has been correctly connected to the network.

q

The projector information that is generated when a problem is detected is 
stored until EasyMP Monitor is closed. EasyMP Monitor displays will not 
be updated automatically even if the projector status returns to normal. 
Click "Refresh" in the main window to update the status.

The following icon operations can be carried out in Grouping view.

All projectors in the group are normal.

A projector in the group has a warning or problem status.

A projector requiring immediate attention has been detected 
within the group.

The projector is not being monitored. If you right-click the icon and 
select Monitoring enabled, the projector will be added to the 
projectors that are being monitored.

Data being updated 

*1

No Monitor Password was entered when the projector was 
registered, or an incorrect Monitor Password was entered. s

*2

*3