Emulex Solaris SFS Driver LP1150-F4 User Manual
Solaris SFS Driver User Manual
Page 151
ELS Events
MSG_ID: 0800 Debug: ELS Sent
VERBOSE_MASK: LOG_ELS (0x00000100)
DESCRIPTION: This indicates that an ELS command is being sent.
SEVERITY LEVEL: Debug
MESSAGE: ELS sent
ACTION: No action needed, informational.
DESCRIPTION: This indicates that an ELS command is being sent.
SEVERITY LEVEL: Debug
MESSAGE: ELS sent
ACTION: No action needed, informational.
MSG_ID: 0801 Debug: ELS Comp
VERBOSE_MASK: LOG_ELS (0x00000100)
DESCRIPTION: This indicates that an ELS command completed normally.
SEVERITY LEVEL: Debug
MESSAGE: ELS comp
ACTION: No action needed, informational.
DESCRIPTION: This indicates that an ELS command completed normally.
SEVERITY LEVEL: Debug
MESSAGE: ELS comp
ACTION: No action needed, informational.
MSG_ID: 0810 Error: Stray ELS Completion
VERBOSE_MASK: LOG_ELS (0x00000100)
DESCRIPTION: This indicates that an ELS command completion was received without issuing a
corresponding ELS command. This error could indicate a driver or firmware problem.
SEVERITY LEVEL: Error
MESSAGE: Stray ELS completion
ACTION: No action needed. If problems persist, report these errors to Technical Support.
DESCRIPTION: This indicates that an ELS command completion was received without issuing a
corresponding ELS command. This error could indicate a driver or firmware problem.
SEVERITY LEVEL: Error
MESSAGE: Stray ELS completion
ACTION: No action needed. If problems persist, report these errors to Technical Support.
MSG_ID: 0811 Debug: Abnormal ELS Completion
VERBOSE_MASK: LOG_ELS (0x00000100)
DESCRIPTION: This indicates that an ELS command completion with a status error in the IOCB. It could
mean the FC device on the network is not responding or the FC device is not an FCP target. The driver will
automatically retry this ELS command if needed.
SEVERITY LEVEL: Debug
MESSAGE: Abnormal ELS completion
ACTION: If the command is a PLOGI or PRLI, and the destination PortID is not an FCP target, no action is
needed. Otherwise, check the physical connections to the FC network and the state of the remote PortID.
DESCRIPTION: This indicates that an ELS command completion with a status error in the IOCB. It could
mean the FC device on the network is not responding or the FC device is not an FCP target. The driver will
automatically retry this ELS command if needed.
SEVERITY LEVEL: Debug
MESSAGE: Abnormal ELS completion
ACTION: If the command is a PLOGI or PRLI, and the destination PortID is not an FCP target, no action is
needed. Otherwise, check the physical connections to the FC network and the state of the remote PortID.
MSG_ID: 0820 Debug: ELS Rcvd
VERBOSE_MASK: LOG_ELS (0x00000100)
DESCRIPTION: This indicates that an unsolicited ELS command was received.
SEVERITY LEVEL: Debug
MESSAGE: ELS recvd
ACTION: No action needed, informational.
DESCRIPTION: This indicates that an unsolicited ELS command was received.
SEVERITY LEVEL: Debug
MESSAGE: ELS recvd
ACTION: No action needed, informational.
MSG_ID: 0821 Debug: Unsolicited ELS Dropped
VERBOSE_MASK: LOG_ELS (0x00000100)
DESCRIPTION: This indicates that an unsolicited ELS command was received and then dropped for some
reason.
SEVERITY LEVEL: Debug
MESSAGE: Unsolicited ELS dropped
ACTION: No action needed, informational.
DESCRIPTION: This indicates that an unsolicited ELS command was received and then dropped for some
reason.
SEVERITY LEVEL: Debug
MESSAGE: Unsolicited ELS dropped
ACTION: No action needed, informational.