Emerson Liebert PSA Line-Interactive UPS 500-1500VA User Manual
Configuring Liebert MultiLink for Your System
29
Liebert
®
MutiLink
®
8.1
Using MultiLink Menu Items
8.1.1 MultiLink Menu - Save Event Configuration
Changes to Event Actions must be saved before they will take
effect. To do this:
• Click on MultiLink at the top of the window, then on
Save Event Configuration, as shown at right.
If you try to exit the Viewer before saving Event Actions
If you try to exit the Viewer before saving Event Actions
changes, Liebert MultiLink will prompt you to do so.
8.1.2 MultiLink Menu - Service
The Service menu item allows the System Administrator to verify that the Liebert MultiLink service
(daemon) is running or to start or stop the Liebert MultiLink service.
Under normal circumstances, you will not need to start or stop the Liebert MultiLink service
Under normal circumstances, you will not need to start or stop the Liebert MultiLink service
manually. Stopping the service means that the software is unable to protect your computer network
and data during a power failure. See 9.1 - Starting or Stopping Liebert MultiLink Service for
details.
If you wish to verify that Liebert MultiLink is running:
If you wish to verify that Liebert MultiLink is running:
• Click on MultiLink, then on Service. The Service Control window states whether Liebert
MultiLink is running.
• Click on Close to close the Service Control window.
8.1.3 MultiLink Menu - Exit
To close the MultiLink Viewer:
• Click on MultiLink, then on Exit, as shown at right.
This closes the Viewer, but does not stop Liebert MultiLink’s
monitoring process; this continues running in the
background.
If you have made any changes to Liebert MultiLink’s Event
If you have made any changes to Liebert MultiLink’s Event
Actions that have not been saved, Liebert MultiLink will
prompt you to save the changes before closing the Viewer.
Click on
MultiLink . . .
. . . then click
on Save Event
Configuration.
Click on
MultiLink . . .
. . . then click
on Service . . .
. . . to view the
Service Control
dialog box.
Click on
MultiLink . . .
. . . then click
on Exit.