Emerson Liebert PSA Line-Interactive UPS 500-1500VA User Manual

The Setup tab allows you to change the device type, rename the UPS, change the type of 

connection—serial, USB or SNMP—designate the event source and enter a description of the UPS.

• Click on the Overview tab. 
• In the left side of the window, right-click on the UPS and choose Properties from the pop-up 

menu. The tabs in the Properties window depend on the type of connection and software version:

Contact Closure: Setup, Web, Clients
USB Device/MultiLink Basic Notification Source: Setup, Web, Clients, Data Logging
Serial UPS/SNMPv1 Device: Setup, Web, UPS Settings, Clients, Data Logging

• Click on the Setup tab. 

• The Device Type box displays the type of connection between the computer and the UPS: 

Contact Closure—for example, MultiLink Agent computer in Figures 1 and 2
USB Device—MultiLink Agent computer in Figures 1 and 2
Serial UPS—MultiLink Agent computer in Figures 1 and 2
SNMPv1 Device—MultiLink Agent computer in Figure 3
MultiLink Basic Notification Source—MultiLink Client computer in Figure 3

See 3.1 - Connecting host computer, UPS and targeted clients. The software detects the 

type of connection by sensing the type of UPS and cable connected to the computer.

• The Device Name box displays a name for the UPS. This name can be changed by entering a new 

name in the box.

• The Enable Actions check box allows you to designate which UPS in the My Device List 

subfolder is to act as the source of events for the host computer. There can be only one event 

source for each Liebert MultiLink installation. For details, see 8.4.2 - Liebert MultiLink Event