Emerson Liebert PSA Line-Interactive UPS 500-1500VA User Manual

The UPS Settings tab allows the user to configure certain features of the UPS. For all connection 

methods, you can record the location of the UPS and enable or disable the UPS audible alarm and 

automatic restart of the UPS when utility power returns after a power failure. A Serial UPS 

connection permits an automatic battery test. An SNMP connection allows specification of a contact 

person for UPS-related events.

• Click on the Overview tab. 
• In the left side of the window, right-click on the UPS and choose Properties from the pop-up 

menu.

• Click on the UPS Settings tab (not available with Contact Closure or MultiLink Basic 

Notification Source).

• In  the  Contact box (SNMP connection), enter the name of the person who should be contacted 

about issues involving this UPS.

• In  the  Location box, enter the physical location of the UPS, for example, “George’s cubicle.” This 

optional field is helpful if the user has more than one UPS.

• (Certain UPS models only) To allow activation of an alarm when a UPS-related event occurs, click 

in the Enable UPS Audible Alarm box. To deactivate the alarm, clear the check box.
This operation prevents the UPS from sounding an audible alarm for any condition. To silence the 

alarm while an event is occurring, see 9.2.3 - UPS Audible Alarm—Silencing Alarm.

• (Certain UPS models only) To perform periodic battery tests (Serial UPS), click in the Enable 

Automatic Battery Test box. To disable automatic testing, clear the check box.

• (Certain UPS models only) To automatically restart the UPS after utility power is restored 

following a loss of input power, place a check mark (✔) in the Enable Autorestart check box, 

then specify the desired time delay in the Autorestart Delay box. To disable automatic 

restarting, clear the check box.