Emerson TCL User Manual
3
Case: Polycarbonate NEMA 4X/CSA 4 (IP65).
Dimensions: 6.10 x 6.10 x 5.15 in. (155 x 155 x 131 mm)
Conduit openings: Accepts PG13.5 or 1/2 in. conduit
fittings
Display: Monochromatic back-lit LCD. Main character
height 0.6 in (15mm). Display is user-programable
Languages: English, German, Italian, Spanish, French,
Portuguese
Ambient temperature and humidity: 32 to 131°F (0 to
55°C); RH 5 to 95% (con-condensing)
Storage temperature: -4 to 140°F (-20°C and 60°C)
Power: Code -01: 115/230 VAC ±15%, 50/60 Hz. 10 W.
Code -03: 85 to 265 VAC, 47.5 to 65.0 Hz, 15 W
(includes four relays)
(includes four relays)
Equipment protected by double insulation
RFI/EMI:
EN-61326
LVD:
EN-61010-1
Outputs: Two 4-20 mA or 0-20 mA isolated outputs.
Continuously adjustable. Linear or logarithmic.
Maximum load 550 ohms. Output dampening with
time constant of 5 sec is user-selectable.
Maximum load 550 ohms. Output dampening with
time constant of 5 sec is user-selectable.
Alarms relays (analyzer option -03 only): Four alarm
relays for process measurement(s) or temperature.
Any relay can be configured as a fault alarm instead of
a process alarm. Each relay can be configured inde-
pendently and each can be programmed with interval
timer settings.
Any relay can be configured as a fault alarm instead of
a process alarm. Each relay can be configured inde-
pendently and each can be programmed with interval
timer settings.
Relays: Form C, SPDT, epoxy sealed
Relay Contact ratings:
5 A at 28 VDC or 300 VAC (resistive)
1/8 HP at 120/240 VAC.
1/8 HP at 120/240 VAC.
Terminal Connections Rating: Power connector
(3-leads): 18-12 AWG wire size. Current output con-
nectors (2-leads): 24-16 AWG wire size. Alarm relay
terminal blocks: 18-16 AWG wire size
nectors (2-leads): 24-16 AWG wire size. Alarm relay
terminal blocks: 18-16 AWG wire size
Weight/Shipping Weight: (rounded up to nearest lb or
nearest 0.5 kg): 1.5 kg (3 lb)/2.0 kg (4 lb)
MODEL TCL
SECTION 1
DESCRIPTION AND SPECIFICATIONS
1.3 SPECIFICATIONS — MODEL 1056 ANALYZER
1.2 SPECIFICATIONS — SAMPLE CONDITIONING SYSTEM
GENERAL
Enclosure: Fiberglass reinforced polyester, NEMA 3
(IP53) suitable for marine environments
Dimensions: 14.5 x 13.0 x 8.6 in. (369 x 329 x 218 mm)
Mounting: Wall
Ambient Temperature: 32° - 122°F (0 - 50°C)
Ambient Humidity: 0 - 90% (non-condensing)
Power: 115 Vac, 6.9 W, 50/60 Hz;
230 Vac, 7.0 W, 50/60 Hz
Hazardous Location: The TCL sample conditioning sys-
tem has no hazardous location approvals.
Pumps:
EN 809:1998
Weight/Shipping Weight: 14 lb/16 lb (6.5 kg/7.5 kg)
SAMPLE REQUIREMENTS
Inlet Connection: compression fitting, accepts 1/4 in. OD
tubing
Drain Connection: 3/4 in. barbed fitting (must drain to
open atmosphere)
Inlet Pressure: <100 psig (791 kPa abs)
Flow: at least 0.25 gph (15 mL/min)
Temperature: 32 - 122°F (0 - 50°C)
Total Alkalinity: <300 mg/L as CaCO
3
. For samples con-
taining <50 mg/L alkalinity, consult the factory.
SAMPLE CONDITIONING SYSTEM
Reagent: Potassium iodide in vinegar.
Reagent Usage: 5 gallons lasts approximately 60 days.
Reagent Pump: Fixed speed peristaltic pump, about
0.2 mL/min
Sample Pump: Fixed speed peristaltic pump, about 11 mL/min
Hazardous Location Approvals - Applies to analyzer
only.
only.
Class I, Division 2, Groups A, B, C, & D
Class Il, Division 2, Groups E, F, & D
Class Ill T4 Tamb= 50
Class Il, Division 2, Groups E, F, & D
Class Ill T4 Tamb= 50
°C
Evaluated to the ANSI/UL Standards. The ‘C’ and ‘US’ indi-
cators adjacent to the CSA Mark signify that the product has
been evaluated to the applicable CSA and ANSI/UL
Standards, for use in Canada and the U.S. respectively