Emerson Liebert DS Precision Cooling System 28-105kW User Manual

• Always keep the unit upright, indoors and protected from damage.
• If possible, transport the unit using a pallet jack or forklift.
• Personnel should be properly certified and trained to move and rig equipment.
• If using a forklift, make sure that the forks (if adjustable) are spread to the widest allowable dis-

tance that will fit under the skid.

• When moving the skidded Liebert Air Economizer with a forklift, do not lift the unit any higher 

than 6" (152mm). If circumstances require the unit to be lifted higher than 6" (152mm), all per-

sonnel not directly involved in raising the unit must be no closer than 20 feet (5m) from the lift 

point of the unit.

1. Remove the exterior packaging.
2. Align forklift with either the front or rear of the unit. Ensure that the forks are locked at the 

widest position that will fit under pallet.

3. Drive the forklift forward, sliding the forks under the base of the unit.
4. Move the Liebert Air Economizer as close to its installation location as possible.

Verify that the floor will support the cooling unit and the Liebert Air Economizer. If a forklift 

will be used to move either unit, verify that the floor will support the forklift.

Save all recyclable materials for reuse. Dispose of any non-recyclable materials properly.
1. Cut the bands securing the Liebert Air Economizer to its skid.
2. Remove any protective and cushioning material.
3. Remove the plastic bag from the unit.

Risk of sharp bands under tension. Can cause personal injury.
The bands securing the Liebert Air Economizer to the skid are under extreme tension. Only 

properly trained and qualified personnel wearing appropriate safety headgear, gloves, shoes 

and glasses should attempt to remove packaging from this unit.