Emerson Dual Conversion Online UPS GXT3-6000RT208 User Manual

Liebert MultiLink monitors the UPS continuously and can shut down a computer or server in the 

event of an extended power failure.
Liebert MultiLink can also be configured for use without the USB cable when the Liebert IntelliSlot

®

 

SNMP/Web card is installed in the UPS. Additionally, Liebert MultiLink can be configured to coordi-

nate shutdown across the network with other computers running Liebert MultiLink when you pur-

chase a Liebert MultiLink License Kit. For more information about the Liebert IntelliSlot SNMP/Web 

Card and Liebert MultiLink License Kits, visit our Web site (

) or contact your local 

dealer or Emerson representative.
Several option cards are available for use in the Liebert IntelliSlot port of the Liebert GXT3

™

. The 

Liebert IntelliSlot SNMP/Web Card provides SNMP and Web-based monitoring and control of the 

UPS across the network.
The Liebert IntelliSlot MultiPort 4 Card allows installing Liebert MultiLink software on four comput-

ers and coordinate shutdown in the event of a power failure.
The Liebert IntelliSlot Relay Card provides dry contact relay outputs for custom wired applications 

and delivers support for built-in shutdown for AS/400 systems. 

The UPS is equipped with a Remote Emergency Power Off (REPO) connector. 
The user must supply a means of interfacing with the REPO circuit to allow disconnecting the UPS 

input feeder breaker to remove all sources of power to the UPS and connected equipment to comply 

with national and local wiring codes and regulations.

To maintain safety (SELV) barriers and for electromagnetic compatibility, signal cables 

should be shielded and run separate from all other power cables, where applicable.

To maintain safety (SELV) barriers and electromagnetic compatibility, signal cables should 

be shielded and run separately from power cables.