Emerson 5500 SERIES User Manual
Thin Web Server Setup Program – Serial Connection
4-1
Minimum PC Requirements for Setup and Browser Programs
The Thin Web Server requires the following minimum system
configuration for the setup and browser program for serial connection:
configuration for the setup and browser program for serial connection:
• Microsoft
®
Windows
®
2000 or XP operating system
• Personal computer with Pentium™ 4 2 GHz or higher processor
• CD-ROM drive
• Serial Port (RS-232), Ethernet Port (RJ-45)
• CD-ROM drive
• Serial Port (RS-232), Ethernet Port (RJ-45)
How to Install the Setup Program for Serial Connection
The Thin Web Server Setup program on the CD-ROM must be installed
on the PC or notebook PC that is temporarily connected to the Thin Web
Server. The setup.exe program takes you through the installation with on-
screen instructions.
Note: Windows
on the PC or notebook PC that is temporarily connected to the Thin Web
Server. The setup.exe program takes you through the installation with on-
screen instructions.
Note: Windows
®
may require Administration rights to install this software.
1. Load the CD into the PC’s CD-ROM drive.
The PC should automatically launch the setup.exe file
(if the PC is set-up for autorun). If the installation does not start
automatically, click Start on the taskbar, then choose Run
from the Start menu.
(if the PC is set-up for autorun). If the installation does not start
automatically, click Start on the taskbar, then choose Run
from the Start menu.
In the dialog box type the filename setup.exe. Use (your CD
drive letter):\setup.exe (e:\setup.exe for example). Click OK.
drive letter):\setup.exe (e:\setup.exe for example). Click OK.
The Thinweb Server Setup Program logo
displays during installation process.
2. The Welcome screen displays after the CD is
2. The Welcome screen displays after the CD is
read.
To proceed click Next to continue or click
Cancel to quit.
Continued on next page Î.