Emerson NR290TTC User Manual

Playing Cassette Tapes

Note: Before inserting a tape in the player be sure that there is no excess slack

in the cassette that could become jammed in the mechanism.

Refer to the CARE AND MAINTENANCE section for instructions on removing

excess slack from the cassette.

Rotate the OFF-VOLUME control clockwise until

a click is heard and set the Volume to a low

level. The POWER indicator comes on .

1.)

Set the Function selector (AM/FM/TAPE/CD/PHONO) to the TAPE position.

2.)

Insert your cassette into the slot located on right side cabinet, as shown in

the illustration, with the side you wish to play facing up and the open end

on the right side.

3.)

Cassette playback begins as soon as the tape is inserted. Adjust the OFF-

VOLUME control to the desired level.

4.)

To advance the tape rapidly, depress the EJ/FF (Eject/Fast

Forward) button approximately half way. The tape will move

forward rapidly as long as the button is depressed. Normal

playback will resume when the button is released.

5.)

When the tape ends, the player stops automatically. Depress the

EJ/FF (Eject/Fast Forward) button completely to remove the

cassette from the player. You may press the EJ/FF (Eject/Fast

Forward) button to stop playback and remove the cassette at any

time.

6.)

To turn the system off , rotate the OFF-VOLUME control counter

clockwise until a click is heard. The POWER indicator goes off .

7.)

POWER

RANDOM

PROG.

Open End

Cassette Tape