Emerson Avocent HMX Digital High Performance KVM Switch Installation Guide
42 HMX Extender System Installer/User Guide
4. Press 2 to select Transmitter IP Config and press Enter. The Transmitter IP Config menu will
appear. The old Transmitter IP Address is displayed beside menu option 1.
Figure 3.21: Transmitter IP Configuration Menu on the HMX User Station
NOTE: This screen is available only in Extender Mode.
5. Press 3 to select Detect Transmitter Address and press Enter.
6. Turn on the transmitter.
7. The HMX user station will detect and save the IP address of the connected transmitter. The
6. Turn on the transmitter.
7. The HMX user station will detect and save the IP address of the connected transmitter. The
Transmitter IP Configuration Menu will refresh, and the current IP address of the connected
Transmitter will be displayed beside menu option 1.
Transmitter will be displayed beside menu option 1.
8. To save your changes and exit the menu, type 0 (zero) and press Enter.
Authentication
Authentication for the HMX user station
You can change the password settings for the HMX user station through the serial menu via the
Receiver Security Configuration Menu.
Receiver Security Configuration Menu.
To access the Receiver Security Configuration Menu:
1. Press Enter to display the serial menu. The Appliance Selection Menu will be displayed.
2. Press 1 to access the Receiver Main Menu and press Enter. If the password option is enabled,
2. Press 1 to access the Receiver Main Menu and press Enter. If the password option is enabled,
you will be prompted for a password.