Emerson Avocent LongView IP KVM Extenders - Digital Extension Solutions Installation Guide

Operating a target computer through the LongView IP KVM extender system is no different than 
working directly connected to your target computer. All peripherals operate as if directly 
connected, even though the target computer is located at a distance. 

While the LongView IP KVM extender system default settings will work in most environments, 
you may configure the settings to better fit your installation via the serial menu. You can also 
upgrade the LongView IP KVM extender system via the serial menu. See Flash Upgrading your 
LongView IP KVM Extender System on page 35 for more information.

There are two blue LEDs on the front panel of a user station. The PWR LED will light up when the 
user station is turned on. The ACTIVE LED will blink slowly until the user station establishes a 
connection with the transmitter. When a connection is established between the user station and 
transmitter, the ACTIVE LED will stop blinking and will remain lit.

Two LEDs are built into the RJ-45 connectors on the user station and transmitter.