Emerson WORLD CLASS 3000 User Manual
Installation (Applicable to all Models)
6
2.4.1 Handling With Skid
• Always keep the unit upright, indoors and protected from damage.
• If possible, transport the unit using a fork lift; otherwise, use a crane with belts or cables, avoid-
• If possible, transport the unit using a fork lift; otherwise, use a crane with belts or cables, avoid-
ing pressing on the top edges of the packaging.
• If using a fork lift, make sure the forks, if adjustable, are spread to the widest allowable distance
to still fit under the skid.
NOTICE
Risk of overhead interference. Can cause unit and/or structure damage. Refer to the
installation plans prior to moving the unit to verify clearances.
While on the skid, the unit is too tall to fit through a standard height doorway (83 inches or
While on the skid, the unit is too tall to fit through a standard height doorway (83 inches or
2108 mm tall). Any attempt to move the unit, while on the skid, through a standard doorway
will cause damage to the unit.
2.4.2 Removal of Skid
• Remove the plywood skirting that keeps the skid and unit in place.
• Raise the Challenger 3000 off the skid. Liebert recommends using a fork lift (see Figure 1)
• Raise the Challenger 3000 off the skid. Liebert recommends using a fork lift (see Figure 1)
or similar machine to ensure that the unit is lifted properly.
• Once the unit is raised, the skid can be removed.
Figure 1
Removing Challenger from skid
Table 1
Unit net weight
Model
Lb (kg)
036E/035E
535 (243)
060E/059E
545 (247)
042A/040A
615 (279)
067A/065A
670 (304)
046WG/045WG
700 (318)
071WG/070WG
750 (340)
061G/058G
785 (356)
068C/072C
545 (247)
102C/101C
555 (252)
Remove plywood skirting holding
unit and skid in place.
Raise unit with fork lift
or similar machine.