EMC CLARiiON AX150 Series User Manual

33

Microsoft
Windows 2008
[x64]:
DataCenter,
Enterprise
Edition,
Standard
Edition

NEC N8190−120 (LP1050);
QLogic QLE2360−E−SP

EMC Connectrix
DS−220B−FF−D

128, 256

Y

EMC
CLARiiON
AX150

34

Microsoft
Windows 2008
[x64]:
DataCenter,
Enterprise
Edition,
Standard
Edition

NEC N8403−018 (LPe1105)

NEC: 12−Port 4GB FC
Switch Module
(N8406−019), 16−Port
Pass−Through Module
for NEC SigmaBlade−H
(N8406−017), 24−Port
4GB FC Switch Module
(N8406−020)

256

Y

EMC
CLARiiON
AX150

35

Microsoft
Windows 2008
[x64]:
DataCenter,
Enterprise
Edition,
Standard
Edition

QLogic QLE2360−E−SP

EMC Connectrix:
3250−VL2E

,

DS−8B2−0DL;

QLogic SANBox:
SB1404−10AJ−E,
SB3050−08A−E

128, 256

Y

EMC
CLARiiON
AX150

1.  The minimum firmware revision for the ES−4300 is 5.05.00 (This firmware revision is only to be used on ES−4300)
2.  EMC supported drivers, firmware, and boot BIOS can be downloaded from http://www.emulex.com in the EMC section, by obtaining the supported driver for the Emulex LPe1150−E.
3.  Requires IBM Multi−Switch Interconnect Module for IBM BladeCenter (39Y9314) installed in IBM BladeCenter H and with appropriate fibre channel switch modules to installed in bays

8 & 10.

4.  This switch module is supported in both legacy switch module position (bay 3 or 4) of all IBM BladeCenter chassis' and when installed in the IBM Multi−switch Interconnect Module for

IBM BladeCenter (39Y9314), in bays 8 and 10 in the IBM BladeCenter H chassis.

5.  NPIV must be enabled for this switch.
6.  This switch module is supported in both legacy switch module positions (bays 3 and 4) of all IBM BladeCenter Chassis and when installed in the IBM Multi−switch Interconnect

Module for IBM BladeCenterTM (39Y9314), in bays 8 and 10 in the IBM BladeCenter H chassis.

7.  Supported only in bays 3 and 4 of IBM BladeCenter chassis'.
8.  NPV is not supported with SAN−OS versions less than 3.3.1c
9.  This switch is offered by Dell as the Brocade VL2 LC.

10.  Dell offers the following versions of the DS−220B−FF−D switch: DS−210B−DE and DS−210B−DEU. Please reference the Dell website for further information.
11.  This switch module supports ISL connection to Cisco FC switches or direct connection to EMC Storage Arrays only.
12.  Direct connection to EMC Storage Arrays are not supported
13.  Internal port(s) on Qlogic or McData 4Gb FC switch module(s) must be set to 4Gb (if 4Gb operation is required or to 2Gb if 2Gb operation is required)
14.  ISLs are supported to Cisco FC switches
15.  The following setting should be verified: DefaultZoning = False; DefaultVisibility = None
16.  One of the core fabric switches must be configured to be a principle switch. the blade switches should not acquire the role of principle switch.
17.  HP Part number AE373A is 12 port upgrade license for Brocade 4/12 SAN Switch.
18.  NPIV must be enabled for this switch
19.  Fibre channel arbitrated loop connections (direct attach) are not supported for EMC Storage Arrays.
20.  External boot required BIOS v1.26 (in Multiboot 1.63) on Qlogic QMH2462 4Gb FC HBA (403619−B21) when connected to VC−FC module (409513−B21).

1

Microsoft
Windows 2008
[x86]:
DataCenter,
Enterprise
Edition,
Standard
Edition

Bull 2Gbps FC Mezzanine Card − Dual port: for NovaScale Blade Series
CFSN202−1100, mini for NovaScale Blade 2021 CFSN202−2100;

Bull: Emulex 4Gb LP1105BC Mezzanine HBA (CFSN202−4500), Qlogic 4Gb
mezzanine HBA (CFSN202−2200)

Bull: Brocade 4Gb SAN
Switch Module, QLogic
20−Port 4GB FC
Switch module

256

Y

EMC
CLARiiON
AX150

2

Microsoft
Windows 2008
[x86]:
DataCenter,
Enterprise
Edition,
Standard
Edition

Dell 2342M

Dell: Brocade 1/2Gb
FC Switch Module
(SW3014), Optical
Pass−thru Module
(J6780)

256

Y

EMC
CLARiiON
AX150