Electro-Voice Headphones R300 User Manual

5

QUick seT-Up: transMitter

1. With the Power switch on the transmitter OFF, install two fresh AA batteries into the transmitter.

2. Press the transmitter Power Switch until the display comes on.

3. Hold the transmitter with the EZsync Port facing the receiver, about a foot (30 cm) away.

4. Press the SYNC Button on the receiver, SYNC will show in the display.

5. Once the channel is set in the transmitter, the display will switch to the main  

display and show RF and Audio Levels.

R300

EZsync

Clear

EZsync

R300

ClearScan

SET