Ecom Instruments ECOM-EF24F2G User Manual

 

34 

 

 
 
 
 

This appendix contains specific information to help you identify and solve problems. 
If your switch does not function properly, please make sure it is set up according to 
the instructions on the manual. 
If you suspect your switch is not connected correctly to your network, check the 
following points before you contact your local dealer for support. 
 

•  Make sure the Power is ON (Check the Power LED). 

•  Make sure the cable is connected properly on both ends. 

•  Make sure that the maximum cable length between switch and end node 

does not exceed 100 meters (for 10/100/1000BASE-T connection). 

•  Make sure that the maximum switch-to-hub/switch cable distance does not 

exceed 100 meters (for 10/100/1000BASE-T connection). 

•  Verify that the cabling type used is correct.  

•  Check the corresponding Link/Act, FDX/Col, 100M, 1000M for signs of 

faulty connection. Check the status of the cable attachment. If the problem 
persists, try a different cable.  

•  Try another port on the Switch. 

•  Turn off power supply to the Switch.  After a while, turn it on again to see if 

it resumes to its normal function. 

•  If you find out where the problem is but cannot solve it by yourself, or you 

simply cannot locate what is at fault, please contact your local dealer for 
technical support.