Manualsbrain.com
  1. Manuals
  2. Brands
  3. EFJohnson
  4. VR-CM50
  5. User Manual

EFJohnson VR-CM50 User Manual

Download
Page of 50
EQUIPMENT CHECK-OUT AND ADJUSTMENTS
6-4
February 1996
Part No. 004-3039-274
SCREEN 1
______________________________________________________________________________________
TOUCH THE UPPER LEFT POINT USING ONLY ONE FINGER
FINGER SHOULD BE PERPENDICULAR TO SCREEN
HOLD FINGER IN PLACE UNTIL YOU ARE INSTRUCTED TO REMOVE IT
Press ANY key to ABORT calibration
______________________________________________________________________________________
SCREEN 2
______________________________________________________________________________________
AFTER PRESSING UPPER LEFT, TOUCH THE LOWER RIGHT POINT USING
ONLY ONE FINGER
FINGER SHOULD BE PERPENDICULAR TO SCREEN
HOLD FINGER IN PLACE UNTIL YOU ARE INSTRUCTED TO REMOVE IT
Press ANY key to ABORT calibration
______________________________________________________________________________________
When the calibration is complete, the message  
SF CAL Written, Calibration  updated on Installed 
SFKERN Driver , will be displayed.     
c:\> prompt will display:
4. Initialize the CRT Console:     
Reboot the system by pressing the RESET button on 
the computer.      
The Main Screen will then be displayed.    
NOTE: if the Main Screen does not appear, check 
the AUTOEXE.BAT file and make sure the  drivers 
are installed.  If they are not, call for technical help 
if you do not know how to install  them.
6.5 AFTER SYSTEM CHECK-OUT
At this point, the E.F. Johnson CRT Console system 
installation and checkout has been completed.  If you 
have any questions or problems, contact Technical Sup-
port, 1-800-328-3911.  Be sure to complete and mail the 
warranty cards for other manufacturer’s equipment, such 
as the CRT monitor, printer, modem, etc.  These can be 
found at the back of the VR-CM50 Console Service Man-
ual, Volume 2.