Edirol USB Audio/MIDI Interface UA-20 User Manual
49
Español
Italiano
Français
Deutsch
English
Getting Connected and Installing Drivers (Macintosh)
FreeMIDI settings
To check the FreeMIDI settings, you will first need to connect
a MIDI sound module to the UA-20's MIDI OUT connector.
For details on connecting a MIDI sound module, refer to the
owner's manual for your MIDI sound module.
a MIDI sound module to the UA-20's MIDI OUT connector.
For details on connecting a MIDI sound module, refer to the
owner's manual for your MIDI sound module.
1
Set the UA-20’s
ADVANCE (mode select) switch
to
the
ON
position.
2
Use the USB cable to connect the UA-20 to your
computer.
computer.
3
From the CD-ROM, copy the
Driver E - FreeMIDI
Driver - Settings
folder onto the hard disk of your
Macintosh.
4
Open the
FreeMIDI Applications
folder from the
location into which you installed FreeMIDI, and
double-click the
double-click the
FreeMIDI Setup
icon to start it up.
5
When
“OMS is installed on this computer...”
appears, click
[FreeMIDI]
.
6
The first time the software is started up, a dialog box
saying
saying
“Welcome to FreeMIDI!”
will appear.
Click
[Continue]
.
7
When the
FreeMIDI Preferences
dialog box appears,
click
[Cancel]
.
8
When the
About Quick Setup
dialog box appears,
click
[Cancel]
.
9
From the
File
menu, choose
Open
.
This unit is equipped with a
protection circuit. A brief
interval (a few seconds) after
connecting a USB connector is
required before the unit will
operate normally.
protection circuit. A brief
interval (a few seconds) after
connecting a USB connector is
required before the unit will
operate normally.