Eclipse Data Technologies GPS Receiver AVN62D User Manual

For reference

Slight differences in operation can sometimes be mistaken for malfunctions, so check the 
following table before asking for any repairs.

If the following fail to solve the problem, contact the place of purchase. 

The screen is dark for a brief period 
when the power is turned on at low 
temperatures.

This is a characteristic of LCDs.

This is not a malfunction.  Wait for a 
brief period.

The display is distorted for a brief 
period after the power is turned on.

This is a characteristic of LCD 
backlighting.

This is not a malfunction.  The display 
will stabilize after a brief period.

No sound comes out.

Volume is poorly adjusted or MUTE is 
functioning.

Press the volume switch and check 
volume.  Or cancel MUTE.

Sound comes out of only one side 
(left or right, front or back).

A speaker wire is disconnected. 

Check the connections of the speaker 
wires. 

Volume is poorly adjusted.

Check the balance and fader 
adjustments.

Sound quality does not change even 
after making adjustments.

The adjusted audio quality is not 
included in the radio broadcast or 
disc.

Check by changing the radio station 
or disc.

A CD/DVD will not go into the deck.

Power is not turned on. 

Turn the vehicle ignition switch to 
[ACC] or [ON].

A disc is already inserted and you are 
trying to insert a second disc.

Eject the previously inserted CD/DVD 
and insert the preferred CD/DVD.

A CD/DVD cannot be played.

There is water condensation in the 
equipment.

Do not use the equipment for a while 
and then try using it again.  (Refer to 
pages 20.)

There is a large scratch or warp in the 
CD/DVD. 

Insert a different CD/DVD.

The CD/DVD is very dirty.

Clean the CD/DVD. 
(Refer to page 21.)

The CD/DVD is upside down.

Insert the CD/DVD with the proper 
orientation. 

A non-supported type of CD/DVD has 
been inserted.

Insert a CD/DVD that is supported by 
the deck.  (Refer to pages 20.)

A  

/  

is 

not displayed on the screen.

The CD changer is not completely 
connected.

Check the connections to the CD 
changer.

Audio is output, but not video.

The screen has been turned off with 
the screen OFF button.

Press 

 or 

. (Refer to 

Audio is output, but not DVD video.  
(With vehicle stopped.)

The emergency / parking brake has 
not be set.

Set the emergency / parking brake.

Neither video nor audio is output.

The vehicle ignition switch has not 
been turned on. 

Turn the vehicle ignition switch to 
[ACC] or [ON]. 

The connection wires and cables are 
not completely connected.

Check the connections to each 
connection wire and cable.

There is a point of light on the display.

At least 99.99% of the pixels on the 
LCD panel are effective, but it is 
possible that 0.01% of the pixels may 
not light or may stay lighted.

This is not a defect, so please use the 
equipment in this condition.