CyClone CYCLONE 360 User Manual

Page of 11
Introduction
The Cyclone360 is a unique wireless controlled LED fi xture with a 360 degree beam. A 
microprocessor controls the 16 million available colors of each of the 8 individual clusters. 
Built in special effects are all controlled by the user using a wireless transmitter from 400 
feet away. Communication is RF (radio frequency) so line of sight is not required. 
The Cyclone360 has two modes of operation. Single Mode and Octal Mode. Single Mode the 
Cyclone360 operates as a conventional ColorMaker fi xture with all 8 clusters controlled using 
a single RGB channel. Single mode also includes our ColorRoll technology.  Octal Mode the 
Cyclone360 requires 10 RGB channels to control the clusters and effects. 8 channels are requires 
to set the individual RGB levels of each of the clusters and 2 channels for effects. The Cyclone360 
incorperates our auto address feature to easy setup. The Cyclone360 is compatable with all 
ColorMaker transmitters operating on 916 Mhz. 
The Cyclone360 was designed for a variety of applications from high energy effects fi xture to soft 
glow illuminator. Mounting bracket provides the user with the option of operating the Cyclone360 
as a horazontal or vertical fi xture for cool effects. ColorMaker Inc. also offers brackets to hang the 
fi xture inside spandex columns, cones or balloons. 
The Cyclone operates on 12 volts DC and can be powered by one of our Battery packs or run from 
an AC 110 volt outlet using the Gl2500 power supply. 
Table of Contents
Cyclone360 Overview
1
Auto Addressing
1
Effects Controls
3
Fade or Flash
4
Patterns
5
Scene Control CM-T10-PRO-Enhanced
5
1